7201 Pig iron and spiegeleisen in pigs, blocks or other primary forms
- 7201.10 Iron; non-alloy pig iron containing by weight 0.5% or less of phosphorus, in pigs, blocks or other primary forms Free
- 7201.20 Iron; non-alloy pig iron containing by weight more than 0.5% of phosphorus, in pigs, blocks or other primary forms Free
- 7201.50 Iron; alloy pig iron; spiegeleisen, in pigs, blocks or other primary forms Free
7202 Ferro-alloys
- 7202.11 Ferro-alloys; ferro-manganese, containing by weight more than 2% of carbon 1.4%
- 7202.19 Ferro-alloys; ferro-manganese, containing by weight 2% or less of carbon 2.3%
- 7202.21 Ferro-alloys; ferro-silicon, containing by weight more than 55% of silicon 1.1%
- 7202.29 Ferro-alloys; ferro-silicon, containing by weight 55% or less of silicon Free
- 7202.30 Ferro-alloys; ferro-silico-manganese 3.9%
- 7202.41 Ferro-alloys; ferro-chromium, containing by weight more than 4% of carbon 1.9%
- 7202.49 Ferro-alloys; ferro-chromium, containing by weight 4% or less of carbon 1.9%
- 7202.50 Ferro-alloys; ferro-silico-chromium 10%
- 7202.60 Ferro-alloys; ferro-nickel Free
- 7202.70 Ferro-alloys; ferro-molybdenum 4.5%
- 7202.80 Ferro-alloys; ferro-tungsten and ferro-silico-tungsten 5.6%
- 7202.91 Ferro-alloys; ferro-titanium and ferro-silico-titanium 3.7%
- 7202.92 Ferro-alloys; ferro-vanadium 4.2%
- 7202.93 Ferro-alloys; ferro-niobium 5%
- 7202.99 Ferro-alloys; n.e.c. in heading no. 7202 5%
7203 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or the like; iron having a minimum purity of 99.94%, in lumps, pellets or similar forms
7204 Ferrous waste and scrap; remelting scrap ingots of iron or steel
- 7204.10 Ferrous waste and scrap; of cast iron Free
- 7204.21 Ferrous waste and scrap; of stainless steel Free
- 7204.29 Ferrous waste and scrap; of alloy steel (excluding stainless) Free
- 7204.30 Ferrous waste and scrap; of tinned iron or steel Free
- 7204.41 Ferrous waste and scrap; turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles Free
- 7204.49 Ferrous waste and scrap; n.e.c. in heading no. 7204 Free
- 7204.50 Ferrous products; remelting scrap ingots Free
7205 Granules and powders, of pig iron, spiegeleisen, iron or steel
7206 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading no. 7203)
7207 Iron or non-alloy steel; semi-finished products thereof
- 7207.11 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (including square) cross-section, width less than twice thickness Free
- 7207.12 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (other than square) cross-section Free
- 7207.19 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon, other than rectangular or square cross-section Free
- 7207.20 Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more of carbon Free
7208 Iron or non-alloy steel; flat-rolled products of a width of 600mm or more, hot-rolled, not clad, plated or coated
- 7208.10 Iron or non-alloy steel; in coils, flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief Free
- 7208.25 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more Free
- 7208.26 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mm Free
- 7208.27 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of less than 3mm Free
- 7208.36 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness exceeding 10mm Free
- 7208.37 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 4.75mm or more but not exceeding 10mm Free
- 7208.38 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 3mm or more but less than 4.75mm Free
- 7208.39 Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of less than 3mm Free
- 7208.40 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief Free
- 7208.51 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness exceeding 10mm Free
- 7208.52 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 4.75mm or more but not exceeding 10mm Free
- 7208.53 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 3mm or more but less than 4.75mm Free
- 7208.54 Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of less than 3mm Free
- 7208.90 Iron or non-alloy steel; flat-rolled, hot-rolled, of a width 600mm or more, n.e.c. in heading no. 7208 Free
7209 Iron or non-alloy steel; flat-rolled products, width 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated
- 7209.15 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more Free
- 7209.16 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm Free
- 7209.17 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm Free
- 7209.18 Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm Free
- 7209.25 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more Free
- 7209.26 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm Free
- 7209.27 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm Free
- 7209.28 Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm Free
- 7209.90 Iron or non-alloy steel; flat-rolled, width 600mm or more, cold-rolled, n.e.c. in heading no. 7209 Free
7210 Iron or non-alloy steel; flat-rolled products, width 600mm or more, clad, plated or coated
- 7210.11 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of 0.5mm or more Free
- 7210.12 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of less than 0.5mm Free
- 7210.20 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with lead, including terne-plate Free
- 7210.30 Iron or non-alloy steel; flat-rolled, width 600mm or more, electrolytically plated or coated with zinc Free
- 7210.41 Iron or non-alloy steel; flat-rolled, width 600mm or more, corrugated, plated or coated with zinc (not electrolytically) Free
- 7210.49 Iron or non-alloy steel; flat-rolled, width 600mm or more, (not corrugated), plated or coated with zinc (not electrolytically) Free
- 7210.50 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with chromium oxides or with chromium and chromium oxides Free
- 7210.61 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium zinc-alloys Free
- 7210.69 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium, other than plated or coated with aluminium zinc-alloys Free
- 7210.70 Iron or non-alloy steel; flat-rolled, width 600mm or more, painted, varnished or coated with plastics Free
- 7210.90 Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with materials n.e.c. in heading no. 7210 Free
7211 Iron or non-alloy steel; flat-rolled products, width less than 600mm, not clad, plated or coated
- 7211.13 Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief Free
- 7211.14 Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, 4.75mm thick or more, excluding those of item no. 7211.13 Free
- 7211.19 Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, less than 4.75mm thick, excluding those of item no. 7211.13 Free
- 7211.23 Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight less than 0.25% of carbon Free
- 7211.29 Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight 0.25% or more of carbon Free
- 7211.90 Iron or non-alloy steel; flat-rolled, n.e.c. in heading no. 7211, width less than 600mm Free
7212 Iron or non-alloy steel; flat-rolled products, width less than 600mm, clad, plated or coated
- 7212.10 Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with tin Free
- 7212.20 Iron or non-alloy steel; flat-rolled, of a width less than 600mm, electrolytically plated or coated with zinc Free
- 7212.30 Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with zinc (not electrolytically) Free
- 7212.40 Iron or non-alloy steel; flat-rolled, width less than 600mm, painted, varnished or coated with plastics Free
- 7212.50 Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated, (excluding tin, zinc or plastic) Free
- 7212.60 Iron or non-alloy steel; flat-rolled, width less than 600mm, clad Free
7213 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils
- 7213.10 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, containing indentations, ribs, grooves or other deformations produced during the rolling process Free
- 7213.20 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, of free-cutting steel Free
- 7213.91 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring less than 14mm in diameter Free
- 7213.99 Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring 14mm or more in diameter Free
7214 Iron or non-alloy steel; bars and rods, not further worked than forged, hot-rolled, hot drawn or hot-extruded, but including those twisted after rolling
- 7214.10 Iron or non-alloy steel; bars and rods, forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling Free
- 7214.20 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling Free
- 7214.30 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, including those twisted after rolling, of free-cutting steel Free
- 7214.91 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, of rectangular (other than square) cross-section Free
- 7214.99 Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, other than of rectangular cross-section Free
7215 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72
- 7215.10 Iron or non-alloy steel; bars and rods, of free-cutting steel, cold-formed or cold-finished, n.e.c. in chapter 72 Free
- 7215.50 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, cold-formed or cold-finished, (not free-cutting) Free
- 7215.90 Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, n.e.c. in heading no. 7215 Free
7216 Iron or non-alloy steel, angles, shapes and sections
- 7216.10 Iron or non-alloy steel; U, I or H sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm Free
- 7216.21 Iron or non-alloy steel; L sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm Free
- 7216.22 Iron or non-alloy steel; T sections, hot-rolled, hot-drawn or extruded, of a height less than 80mm Free
- 7216.31 Iron or non-alloy steel; U sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more Free
- 7216.32 Iron or non-alloy steel; I sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more Free
- 7216.33 Iron or non-alloy steel; H sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more Free
- 7216.40 Iron or non-alloy steel; L or T sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more Free
- 7216.50 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, hot-rolled, hot-drawn or extruded Free
- 7216.61 Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, obtained from flat-rolled products Free
- 7216.69 Iron or non-alloy steel; angles, shapes and sections, cold-formed or cold-finished, (not obtained from flat-rolled products) Free
- 7216.91 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216, cold-formed or cold-finished, from flat-rolled products Free
- 7216.99 Iron or non-alloy steel; angles, shapes and sections, n.e.c. in heading no. 7216 Free
7217 Wire of iron or non-alloy steel
- 7217.10 Iron or non-alloy steel; wire, (not plated or coated), whether or not polished Free
- 7217.20 Iron or non-alloy steel; wire, plated or coated with zinc Free
- 7217.30 Iron or non-alloy steel; wire, plated or coated with base metals (other than zinc) Free
- 7217.90 Iron or non-alloy steel; wire, n.e.c. in heading no. 7217 Free
7218 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7219 Stainless steel; flat-rolled products of width of 600mm or more
- 7219.11 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness exceeding 10mm Free
- 7219.12 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 4.75mm or more but not exceeding 10mm Free
- 7219.13 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 3mm or more but less than 4.75mm Free
- 7219.14 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of less than 3mm Free
- 7219.21 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness exceeding 10mm Free
- 7219.22 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 4.75mm or more but not exceeding 10mm Free
- 7219.23 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 3mm or more but less than 4.75mm Free
- 7219.24 Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of less than 3mm Free
- 7219.31 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled or cold-reduced, of a thickness of 4.75mm or more Free
- 7219.32 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more but less than 4.75mm Free
- 7219.33 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm Free
- 7219.34 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm Free
- 7219.35 Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm Free
- 7219.90 Steel, stainless; flat-rolled, width 600mm or more, n.e.c. in heading no. 7219 Free
7220 Stainless steel; flat-rolled products of width less than 600mm
- 7220.11 Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of 4.75mm or more Free
- 7220.12 Steel, stainless; flat-rolled, width less than 600mm, hot-rolled, of a thickness of less than 4.75mm Free
- 7220.20 Steel, stainless; flat-rolled, width less than 600mm, cold-rolled Free
- 7220.90 Steel, stainless; flat-rolled, width less than 600mm, n.e.c. in heading no 7220 Free
7221 Stainless steel bars and rods, hot-rolled, in irregularly wound coils
7222 Stainless steel bars and rods, angles, shapes and sections
- 7222.11 Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, of circular cross-section Free
- 7222.19 Steel, stainless; bars and rods, hot-rolled, hot-drawn or extruded, other than of circular cross-section Free
- 7222.20 Steel, stainless; bars and rods, cold-formed or cold-finished Free
- 7222.30 Steel, stainless; bars and rods, n.e.c. in heading no. 7222 Free
- 7222.40 Steel, stainless; angles, shapes and sections Free
7223 Stainless steel wire
7224 Alloy steel in ingots or other primary forms, semi-finished products of other alloy steel
7225 Alloy steel flat-rolled products, of a width 600mm or more
- 7225.11 Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, grain-oriented Free
- 7225.19 Steel, alloy; flat-rolled, width 600mm or more, of silicon-electrical steel, (other than grain-oriented) Free
- 7225.30 Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, in coils Free
- 7225.40 Steel, alloy; flat-rolled, width 600mm or more, hot-rolled, not in coils Free
- 7225.50 Steel, alloy; flat-rolled, width 600mm or more, cold-rolled Free
- 7225.91 Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, electrolytically plated or coated with zinc Free
- 7225.92 Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, plated or coated with zinc (other than electrolytically) Free
- 7225.99 Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, (other than plated or coated with zinc) Free
7226 Alloy steel flat-rolled products, of a width of less than 600mm
- 7226.11 Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, grain-oriented Free
- 7226.19 Steel, alloy; flat-rolled, width less than 600mm, of silicon-electrical steel, other than grain-oriented Free
- 7226.20 Steel, alloy; flat-rolled, width less than 600mm, of high speed steel Free
- 7226.91 Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), hot-rolled Free
- 7226.92 Steel, alloy; flat-rolled, width less than 600mm, (excluding silicon-electrical or high speed steel), cold-rolled Free
- 7226.99 Steel, alloy; flat-rolled, width less than 600mm, n.e.c. in item no. 7226.9 Free
7227 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils
- 7227.10 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of high speed steel Free
- 7227.20 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, of silico-manganese steel Free
- 7227.90 Steel, alloy; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7227 Free
7228 Alloy steel bars, rods, shapes and sections; hollow drill bars and rods, of alloy or non-alloy steel
- 7228.10 Steel, alloy; bars and rods, of high speed steel Free
- 7228.20 Steel, alloy; bars and rods, of silico-manganese steel Free
- 7228.30 Steel, alloy; bars and rods, hot-rolled, hot-drawn or extruded Free
- 7228.40 Steel, alloy; bars and rods, forged Free
- 7228.50 Steel, alloy; bars and rods, cold-formed or cold-finished Free
- 7228.60 Steel, alloy; bars and rods n.e.c. in heading no. 7228 Free
- 7228.70 Steel, alloy; angles, shapes and sections Free
- 7228.80 Steel, alloy or non-alloy; hollow drill bars and rods Free
7229 Wire of other alloy steel
Imported chapter 72 goods in 2024 or 2025?
Courts voided some 2025 tariffs and CBP is refunding them now. If you paid them on goods like these, you may be owed money back. The audit is free and we only get paid when you do.